HCPL-4506-500E Intelligent Power Module and Gate Drive Interface Optocouplers
Description
The HCPL-4506 and HCPL-0466 contain a GaAsP LED while
the HCPL-J456 and the HCNW4506 contain an AlGaAs LED.
The LED is optically coupled to an integrated high gain
photo detector. Minimized propagation delay difference
between devices makes these optocouplers excellent solutions
for improving inverter efficiency through reduced switching dead
time.
An on chip 20 kΩ output pull-up resistor can be enabled by
shorting output pins 6 and 7, thus eliminating the need for
an external pull-up resistor in common IPM applications.
Specifications and performance plots are given for typical IPM
applications.
Features
• Performance specified for bommon IPM applications
over industrial temperature range: -40°C to 100°C
• Fast maximum propagation delays
tPHL = 480ns
tPLH = 550ns
• Minimized Pulse Width Distortion PWD = 450 ns
• 15 kV/µs minimum common mode transient immunity at VCM = 1500 V
• CTR > 44% at IF = 10mA
• Safety approval: UL Recognized
-3750 V rms / 1 min. for HCPL-4506/0466/J456
-5000 V rms / 1 min. for HCPL-4506 Option 020 and HCNW4506
CSA Approved
IEC/EN/DIN EN 60747-5-2 Approved
-VIORM = 560 Vpeak for HCPL-0466 Option 060
-VIORM = 630 Vpeak for HCPL-4506 Option 060
-VIORM = 891 Vpeak for HCPL-J456
-VIORM = 1414 Vpeak for HCNW4506
Applications
• IPM isolation
• Isolated IGBT/MOSFET gate drive
• AC and brushless DC motor drives
• Industrial inverters
Ordering Information
HCPL-0466, HCPL-4506 and HCPL-J456 are UL Recognized with 3750 Vrms
for 1 minute per UL1577.
HCNW4506 is UL Recognized with 5000 Vrms for 1 minute per UL1577.
HCPL-0466, HCPL-4506, HCPL-J456 and
HCNW4506 are approved under CSA Component Acceptance Notice #5,
File CA 88324.
Deli electronics tehcnology Co.,Ltd
Email:sales3@deli-ic.com
Skype:hkdeli881
Contact: VIVI
